How to Root Oppo Reno3 Pro via Magisk

Root Oppo Reno3

In this article, we can show you the steps related to How to root the Oppo Reno3 Pro device via Magisk. When it comes to the budget offering, devices from this Chinese OEM are gradually but undoubtedly becoming a name to reckon with. Well, integrating all the essential requirements at a cost that does not burn a hole in your pockets. One could not have asked for more.

Along the same lines, Oppo devices are becoming quite an energetic player in custom development. When you unlock the device’s bootloader, there are plenty of things that you could test out. These contain the likes of flashing Magisk Modules, Substratum Themes, Xposed Framework, Viper4Android, & so on.

Nonetheless, before you could obtain a grip of these mods, there is an essential requirement that you ought to checkmark – you should have administrative privileges over your device. This is achievable by systemless-ly rooting your device via Magisk which is just what we would be debating here. So, without wasting any further time, let’s go ahead with the article to root the Oppo Reno

How to Root Oppo Reno3 Pro?

The below-mentioned instructions are listed under separate sections for the comfort of your understanding. Make sure to follow in the exact same sequence as mentioned later. We and our members would not be held liable in case of a thermonuclear war, your alarm does not wake you up, or if anything occurs to your device and data by executing the below-mentioned steps.

Rooting’s Benefits & Risks

Moreover, when you root your device by flashing the Magisk patched boot.img via Fast-boot Commands; you will be in a state to work out plenty of customizations on your device. These include the similarities of flashing custom ROMs, installing a system recovery like TWRP, or flashing a custom kernel. Along the same lines, you could additionally flash Magisk Modules, Xposed Framework, Substratum Themes, Viper4Android, and the similarities. Still, this is just one side of a story.

Carrying out this method also has its drawbacks. Firstly, the process needs an unlocked boot-loader, and doing so will clear off all the data and cancel the device’s guarantee completely. Besides, WideVine L1 will be diminished to L3, which fails to stream Netflix in HD. Then, a SafetyNet will be triggered, creating problems with the banking apps. Therefore, if all that is fine and stable, let’s get started with the measures to root your device via Magisk.

Disclaimer:

Thetechexplained won’t be responsible if anything happens to your device if you follow this tutorial. Ensure that all your data is already backed-up so that you won’t lose your important data in case of any problems. Installing a custom ROM requires rooting, which voids the warranty and removes the OEM restrictions on your device. This might lead to a drop in the battery life since you are using your device without any battery restriction. But if you use the custom ROMs battery optimizer, your device can survive a whole day. Installing a custom ROM or custom tweak can damage your device software if not installed correctly.

Enable USB Debugging and OEM Unlocking

It is necessary to let your device be unlocked when flashing third-party apps and mods. Since bootloader unlocking is not allowed by default from the OEM, it is better to unlock your device from the OEM limitations before proceeding ahead. Most of these devices have the identical OEM unlocking method. Let’s go through the process and see how difficult it is for you.

  1. First of all, you need to navigate to device settings.
  2. Then navigate to About phone and tap the build number 7 times to unlock Developer options.
  3. Open Developer options, and search for USB debugging. Toggle the slider to unlock it. That’ll allow you to flash or unlock your device via fastboot.

Install Android SDK

Well, to start with, install an Android SDK Platform Tools on your PC. This is an official ADB, and the Fast-boot binary presented by Google is the only recommended one & approved too. So, download it and extract it to your PC (any suitable location). Doing so will provide you with a platform-tools folder, which will be used during this blog.

Download Stock Firmware

You will now have to download the stock firmware for your Nubia 6 device. As we have listed the official download links below, make sure to download the same firmware that is currently installed on your device (you could verify the same via the Build Number). Also, download the ROM that corresponds to your region only.

Reno3 Pro Firmware: Download Link

You might also like:

List of Useful ADB and Fastboot Commands

Downgrade OnePlus 9/Pro from Android 12 to Android 11

Install TWRP Recovery and Root OnePlus Nord N10 5G

How to Unlock Bootloader on OnePlus Devices

Extract the Oppo Payload.bin File

  1. When you downloaded the firmware, it will be in a compressed ZIP format. So, extract it on your PC (any convenient location)
  2. Doing so shall give you a pair of files, including the payload.bin file
  3. You will now extract this payload.bin file to get the boot.img file
  4. When the extraction is complete, copy the boot.img file and transfer it to your device
  5. Nextly, copy the vbmeta.img file and transfer it to the platform-tools folder on your PC

Patch Oppo Reno3 Pro Boot.img via Magisk

Following are the steps:

  1. Download and install the Magisk App on your device
  2. Then, launch it, tap the button Install next to Magisk. Choose Select and Patch a File
  3. Now, navigate to the boot.img file, select it and tap the Let’s Go button situated at the top-right
  4. The patching process will now start and will take a few seconds
  5. When done, open File Explorer and go to the Downloads folder. Then, copy both the patched boot.img file from there and transfer it to the platform-tools folder on your PC
  6. Now, simplify the name of this file so that it becomes more manageable to type in the CMD window. So, rename the patched boot file to magisk_patched_boot.img.

Boot Oppo Reno3 Pro to Fastboot Mode

Following are the steps:

  • Connect your device to the PC (via USB cable). Also, make sure USB Debugging is enabled.
  • Then, head over to the platform-tools folder, type in CMD in the address bar, and press Enter. This will launch the Command Prompt.
  • Type the following command in the CMD window to boot your device to Fastboot Mode;
adb reboot bootloader
  • To verify the Fastboot connection, type the below command and you should get back the device ID;
fastboot devices

Flash Magisk Patched Boot.img and Root Oppo Reno3 Pro

Firstly, verify that you have transferred the vbmeta.img and magisk_patched_boot.img files to the platform-tools folder. If that is well and good, then you may start with the flashing of files.

Hence, the following are the steps:

  • Execute the below command to flash the Magisk patched Boot.img;
fastboot flash boot magisk_patched_boot.img

  • When it is done, use the below command to boot to the OS;
fastboot reboot

Conclusion

That’s it, guys! These were the steps related to How to root the Root Oppo Reno3 Pro via Magisk patched boot.img file. If you still have any questions related to the above-mentioned steps, do let us know in the comment section mentioned below. We will get back to you with the easiest solution as early as possible.

3 Pro device via Magisk.

Leave a Reply